Please email us to get a quote. sales@serpac.com (no larger than 10 MB please).
GEOMETRY ALTERATION INFORMATION
GEOMETRY ALTERATION INFORMATION
MACHINING
Machine a wide range of openings
Recess any surface (for labels or membrane switches)
Endless geometric options
Machine internal features: removal or shortening of circuit board bosses or card guides
MACHINING GUIDELINES
Dimension all geometry from the center line
Allow a 0.03" (0.8mm) radius for all inside-modified corners (additional charges will apply for a smaller radius)
Machined recesses can't be more than 80% of an enclosure's wall thickness
An Illustration with dimensions is required to set up machining
Lead time for machining orders: 48 hours for 1000 pieces or less
No minimum quantities are required; however, a set-up fee will be applied
DEPENDING ON THE QUANTITY OF ORDERS & RECESSES
MOLDING MAY BE THE BETTER OPTION
We can determine these cases and give you quotes for both options
MOLDING
Most enclosures have custom moldable areas (I-Plates)
We can mold custom features, characters, symbols, openings, raised areas, and recesses in the I-Plate areas
I-Plate areas are noted by clicking on the "User Prints" icon on each of our product pages
I-Plates can be textured and non-textured. Textured I-Plates feel and blend with the rest of the enclosure. Non-textured I-Plates are smooth for labels or membrane switches.
I-Plates have a one time tooling charge and are owned by the customer
Some enclosures internal circuit board mounts can be lengthened or shortened
MOLDING GUIDELINES
Dimension all geometry from the center line
Recesses cannot be more than 60% of an enclosures wall thickness
Space between cutouts must be the thickness of the enclosures wall at minimum
I-Plate areas are the only areas customizable by molding
Lead time for molding orders: 2 weeks
No minimum quantities are required; however, a set-up fee will be applied
MOLDING CAPABILITIES
1- Select Above Product
→
2- Click Load Product Info
→
3- Fill In All Information
→
4- Click Get Quote
Product Details
M SERIES
Handheld Remote Enclosure
Serpac Handheld Electronic Enclosures are engineered to be ergonomic and impact resistant. The interchangeable faceplates allow you to install infrared lasers, sensor components, switches, and plug-in points necessary to have at hand. We offer a variety of size options ranging from pocket sized handheld to larger holster sized enclosure boxes. These project boxes are perfect for wireless smart tv remotes / clickers, inventory management scanners, medical testing devices, and even industrial machine controls.
SCREWLESS ACCESS
The M-Series was designed for quick and easy slide release screwless entry.
BATTERY READY
All M-Series include a battery door along with easy install contacts, with solder points, and a spacer for a 9V battery.
OPTIONAL POCKET CLIP
Secure the enclosure to a belt or pocket with the optional pocket clip. Pocket clips are permanently attached.
INDUSTRIAL OPTION
This option will add screw access to the battery door for added security.