How to remove a wheel pin

  1. Using a No. 29 (.136”) drill

  2. Drill a hole about 3/4” deep in the center of the existing wheel pin

  3. Insert a #8 X 1 5/8” Phillips Self-Tapping screw into the drilled hole

  4. Using a Phillips tip #2 bit

  5. Drive the screw 1/2"- 3/4” into the drilled hole

  6. Firmly grip the screw with vise-grip pliers

  7. While pushing down on case, pull up on vise grips

  8. The pin should begin to pull out

  9. Remove old pin and discard

  10. Insert new pin (pn. 7047) and tap into place taking care to not damage the case